VINdecode

Mopar VIN Decoder: Reading Chrysler, Dodge, Jeep and Ram Numbers

The decoder above reads the 17-character VIN of a Chrysler, Dodge, Jeep or Ram, the vehicles most buyers mean by Mopar. It returns year, model, engine, body and plant from the record NHTSA keeps. Cars built before 1981 carry an older Chrysler scheme and come back blank. For every number the decoder can read, a history report is the next step.

Updated November 5, 2026 · Sources cited below

Have a VIN? Check that car

Find the VIN on the driver's door jamb, at the base of the windshield, or on the registration and insurance card.

View sample report
Classic Mopar muscle car beside a panel listing three VIN decoding checks

THE SHORT ANSWER

Type all 17 characters into the decoder above. It reads Chrysler, Dodge, Jeep and Ram numbers from the 1981 model year on and returns year, model, engine, body and plant. A car built earlier has a shorter Chrysler number no federal decoder reads, so a blank there reflects age, not a fault. A decode shows the build only; title brands, crashes and mileage need a history report.

Decodes from
Model year 1981 on, 17 characters
Before 1981
Chrysler's older scheme, no check digit
Fender tag
Paint, trim and options live here, not in the VIN
A decode covers
The factory build, not the car's later life

Mopar is a parts brand, so one decoder covers four badges

Mopar is Chrysler's parts and service name, and enthusiasts use it for the cars too: Chrysler and Dodge, Plymouth and Imperial in the past, and now Jeep and Ram. Plymouth and Imperial have ended, so any Plymouth is a classic. The current badges decode through one federal database, and NHTSA's maker table shows how little the first three characters say about the badge, since a prefix names only the builder and the vehicle type.

PrefixBuilt byVehicle typeBadges it can carry
1C3FCA US LLCPassenger carDodge, Chrysler, Fiat, Lancia
1C4FCA US LLCMultipurpose vehicleSeven makes, Jeep and Ram among them
1D7FCA US LLCTruckDodge only
3C6Chrysler de Mexico TolucaTruckSeven makes, Jeep and Ram among them

What a decode returns, from a 1985 Charger to a 2018 Wrangler

The decoder reports what the maker filed with NHTSA, no more. Three sample numbers from owner complaints went through it, each cut to its first eight characters, last three and model year, so each answer carried an incomplete flag. A full 17 characters gives a firmer reply.

Field1985 Charger2016 Ram 15002018 Wrangler
Model and trimShelby Charger, TurboRam 1500, STWrangler, Unlimited Sahara
Engine2.2 L, no cylinder count3.6 L, 6 cylinders3.6 L, 6 cylinders
Body and drive2-door hatchback, drive blankPickup, 4WD4-door SUV, 4WD
PlantBelvidere, USWarren, USToledo, US

Numbers from the 1980s decode, but the filing is thinner: no cylinder count and no driven wheels came back.

A blank result on a pre-1981 Mopar is the expected answer

NHTSA says its decoder is meant for model years 1981 and forward and omits vehicles from before the standard of the 1980s. Before that no federal format existed and Chrysler used its own shorter scheme, with no check digit, so a decoder has no layout to apply. Blank means old, not bad.

The check digit shows what a classic lacks. Under 49 CFR 565 every VIN has 17 characters, and position 9 holds a value worked out from the other sixteen: weight each, add, divide by 11, and the remainder becomes a digit or an X. Mistype one character and the sum no longer agrees. On older numbers a misread digit looks as plausible as the real one, so photograph plates rather than retyping them.

Which plate answers which question on a classic

On a classic Chrysler product the VIN is half the evidence. Its plate is mounted at the driver's end of the dashboard, where the glass lets you read it from outside. A second metal plate under the hood, the fender tag, carries the build in code.

QuestionRead
Which model line is it?VIN
Which engine left the factory?VIN
What was the original color?Fender tag
Which trim and options?Fender tag
When was it scheduled to be built?Fender tag

A broadcast sheet, the paper that rode the line with the car, sometimes turns up under a seat or above the glovebox. Most are gone, so its absence is ordinary.

Painted body panel close-up with a panel of four key facts on Mopar checks

Clones, tributes and restamped numbers

Chrysler built one body shell as a family car and as a performance model, so badges, stripes and paint are the quick differences, and the price gap is why clones get built. Car line and engine are coded into the number, so it is the first thing a false claim must contradict.

One plate is not enough. Reproduction tags are sold openly, stamped numbers can be re-struck, and a stamped panel may be swapped after rust or crash repair for honest reasons. Trust a car when the VIN, the tag, the paperwork and a registry entry describe the same machine.

  • Get the full number from the seller before you travel.
  • Match car line and engine to the advertised model.
  • Ask the marque registry whether the car is already documented.

From an NHTSA owner complaint

A 2018 Wrangler owner wrote to NHTSA that the Jeep lurched over bumps, its panels were shifting, and module scans returned identifiers from a 2015 vehicle. The owner suspected the Jeep was altered or assembled from other vehicles, and wrote that they should have been told they were buying "something scrapped".

Unproven, but the lesson holds: if hardware and paperwork disagree, find out why before money moves.

Running the check on a Mopar you are considering

  1. Ask the seller for the full number and a photo of the plate before you set off.
  2. Read it again on the car itself: the dash plate and the pillar label must match, and both must match the title.
  3. Count characters. Seventeen goes into the decoder above; fewer means a pre-1981 car, so turn to the tag and a registry.
  4. Compare year, model and engine with the advert. A mismatch pauses the price talk until the seller explains it.
  5. Run NHTSA's recall lookup on the same number, then read the preview for title, damage and mileage.
Title paperwork close-up beside four numbered steps on Mopar checks

Recalls attach to a VIN range, not to a badge

A recall covers certain numbers, not every car of a model, so spotting your Ram or Jeep in the news proves little. NHTSA's recall lookup takes the exact VIN.

From an NHTSA owner complaint

The owner of a 2016 Ram 1500 told NHTSA the truck veered right while turning left and ran into a yard, and a mechanic blamed the steering rack. A recall existed, the owner wrote, but Mopar said the truck's VIN was not affected. The owner disagreed.

Whether a number falls inside a campaign is the maker's call, and the lookup shows it. Run it before you buy and again later.

What a decode cannot show and a history report can

A Mopar can decode exactly as advertised and still have been crashed, branded or rolled back. The decode ties the car to the listing; the report follows the same VIN into what happened next.

Question for the sellerDecode answersReport answers
Was the title ever branded salvage or rebuilt?NoBrands on record
Any crash history or auction photos?NoDamage records and photos, where they exist
Is the mileage consistent over time?NoOdometer readings
Was it reported stolen?NoTheft records

From an NHTSA owner complaint

A buyer of a 2012 Wrangler told NHTSA that the engine began ticking the day after purchase and the check-engine light came on. A Jeep dealership then declined to diagnose it or handle a warranty recall, citing the vehicle's salvaged status.

A title brand can follow a vehicle into the repair bay, so read the history before the sale.

What the report costs and when to buy it

The preview after you enter a VIN costs nothing. One payment follows, covering a single report or three, five or ten when you compare cars. Nothing recurs; see the pricing page for amounts.

The report starts from a 17-character number, so it suits 1981-and-later Mopars; for an older Chrysler product, the tag, the registries and an inspector come first. Whatever the year, decode, compare the build with the advert, run the recall lookup, read the preview, and get an independent mechanic's opinion before paying.

Where this information comes from

Sources and photos: Facts checked against the sources above in November 2026. Photos by Linus Belanger, Masjid MABA and Clarence Tioh on Unsplash; diagrams by VINDecode.

Keep reading

Frequently asked questions

Why does my old Mopar VIN return nothing?

It predates the 1981 federal format. NHTSA's decoder is built for 1981 and later, and an earlier Chrysler number is shorter with no common layout. Nothing is wrong with the car or the number; use the fender tag, an era-specific decoder and a marque registry.

Why does a Dodge or Jeep decode name FCA as the maker?

The first three characters name the company that built the vehicle, not the badge. NHTSA's table lists FCA US LLC for prefixes such as 1C3 and 1C4, and Chrysler de Mexico Toluca for 3C6. The make and model fields lower down show the badge.

Where is the fender tag and what does it record?

It is a metal plate under the hood. On a classic it often holds details the VIN lacks: paint, trim, option codes and a scheduled build date. Compare it with the car in front of you and with the asking price.

Can a VIN prove a car is a genuine performance model?

It is the best single clue, since Chrysler coded the car line and engine into it, yet tags get replaced and stampings re-struck. Ask the seller to state in writing whether the car is original or a tribute, and hire a marque authenticator when the price is high.

Will decoding show whether a Mopar was wrecked or stolen?

No. A decode reads the build the maker filed and stops there. Crash records, title brands, theft reports and odometer readings sit in other records, and a history report searches them. Only the preview is free; the report is bought once.

Now check the car itself

The guide explains what to look for. The report shows what this VIN has on record.

Find the VIN on the driver's door jamb, at the base of the windshield, or on the registration and insurance card.