VINdecode

Hummer VIN Decoder: Decode an H1, H2, H3 or H3T, Then Check Its Past

Enter the 17 characters in the decoder above and it returns model, engine, body and build plant, read from what the manufacturer filed with NHTSA. Hummer is a tricky badge to decode, because the first three characters change depending on which model you are holding. Whatever the decode says, it describes the truck as it was built and nothing that happened afterward.

Updated November 5, 2026 · Sources cited below

Have a VIN? Check that car

Find the VIN on the driver's door jamb, at the base of the windshield, or on the registration and insurance card.

View sample report
Rugged off-road truck on a trail beside a panel listing three Hummer VIN steps

THE SHORT ANSWER

Type the full VIN into the decoder above. An H1 starts with 137, an H2 with 5GR, an H3 with 5GT and an H3T pickup with 5GN. Confirm that model, engine and plant match the listing; blank fields happen. A decode never shows title brands, crashes or odometer history. A history report covers those, and its preview costs nothing.

H1 prefix
137, filed to AM General
H2, H3, H3T prefixes
5GR, 5GT and 5GN, filed to General Motors
Plants on the decodes I ran
Mishawaka (H1, H2) and Shreveport (H3, H3T)
Decode covers
The factory build only

Four models, four different starts

Search NHTSA's manufacturer table for the word Hummer and you get nothing back. The make is on file, with four models, but the number itself is stamped with the identifier of whichever company built the truck. The original H1 came from AM General. The H2, H3 and H3T were built under General Motors.

ModelStarts withFiled toType on file
H1137AM GeneralMultipurpose passenger vehicle
H25GRGeneral MotorsMultipurpose passenger vehicle
H35GTGeneral MotorsMultipurpose passenger vehicle
H3T pickup5GNGeneral MotorsTruck

A number sold as a Hummer that begins with something else is not automatically wrong, since a typo or a swapped plate can do it, but the seller owes you an explanation.

Pickup truck above four Hummer VIN decode facts

What eight real Hummer decodes returned

These came from VINs that owners typed into NHTSA complaints, cut to their first 11 characters and run through NHTSA's decoder.

HummerEngineDrivePlant
2003 H16.5 L V8, dieselBlankMishawaka
2003 H26 L V8, gasoline4WDMishawaka
2006 H33.5 L, 5 cylinders4WDShreveport
2008 H33.7 L, 5 cylinders4WDShreveport
2009 H3T3.7 L, 5 cylinders4WDShreveport
2010 H3 Alpha5.3 L V84WDShreveport

The H3 shows three different engines across those rows, so the engine field is worth reading against the exact truck. The Alpha trim is the V8 version. All of these answers carried NHTSA's incomplete-VIN flag, which is normal when only part of a number is entered; a full 17 characters gives a firmer result.

Model years: where the H1, H2 and H3 sit

NHTSA lists the H1 for every year from 1991 through 2006. The H2 runs from 2003 to 2010, and the H3 from 2006 to 2010. The H3T pickup first appears for 2009. Nothing is listed for 2012 or 2013, which fits the brand's end.

The tenth character of the number carries the year, and the decoder reads it from there rather than from the advert. One H1 number an owner had filed under 2003 decoded as a 2000 truck with a gasoline engine, while another genuine 2003 number decoded as diesel. Same 6.5 L V8 family, different fuel. If the year or fuel type in your decode contradicts the listing, stop and ask which document is right.

  • H1: 1991 to 2006 on NHTSA's list
  • H2: 2003 to 2010
  • H3: 2006 to 2010
  • H3T: 2009 and later in the list

Reading the warnings and the empty boxes

A decoder prints what the maker submitted, so gaps appear. My H1 decodes left drive type empty while every H2 and H3 filled it in. That is a field to check by looking under the truck, not a sign of a bad number.

  • Code 6: the number is incomplete, as it will be if you type only the first part.
  • Code 1: the ninth character fails its arithmetic check, so suspect a typo or an altered number.
  • Code 11: the tenth character is one that is never used for model years, such as I, O, Q, U, Z or 0.
  • Code 12: the year you supplied disagrees with the year coded in the tenth position.
  • Code 14: NHTSA lacks data for some characters in the maker's filing.

Codes 1 and 11 deserve a second look at the VIN plate and the door sticker before you go further.

Recall searches: the model name you type matters

Search recalls for a 2009 or 2010 Hummer under the model name H3T and NHTSA's data returns nothing. Search the same years under H3 and two campaigns appear, one of which names the H3T pickup directly. It covers the blower motor connector module that controls fan speed for the heating and air conditioning, which may overheat. The fix is a part swap at the dealer, paid by GM. The other covers the hood louver clips on 2006 to 2010 H3 trucks.

From an NHTSA owner complaint

In May 2023 the owner of a 2003 H2 reported that the wipers quit in heavy rain at night, leaving no view of the road. He had heard a wiper recall existed but said a lookup by his VIN showed nothing. He had meant to hand the truck to his teenage son and wanted it sorted first.

NHTSA's records do hold a 2008 campaign for that very problem on the 2003 H2, covering water getting into the wiper motor module, with a free cover replacement. Run recalls on the full VIN and again under each model spelling, and keep a printout of what each search showed.

What a decode cannot tell you about a used Hummer

A decode repeats the build record, so a tidy result proves little about the truck's life. The Bureau of Justice Assistance warns that stolen vehicles have been fitted with real VINs lifted from matching vehicles, and that saltwater flooding leaves electrical systems and airbag sensors more likely to fail. A cloned or water-damaged Hummer decodes just as cleanly as an honest one.

Question about the truckThe decodeA history report
Salvage, junk or flood brand?SilentTitle brands where states recorded them
Crash or auction history?SilentDamage records and photos, where held
Odometer rolled back?SilentReadings over the years
Stolen or under a lien?SilentTheft, lien and impound records

The federal title system is also uneven. States brand vehicles by their own rules, and a search can come back clean simply because a source never reported.

Running the history check after the decode matches

Paste the VIN in and a preview appears with no payment. Going further is one payment per report, never a recurring charge, and bundles of 3, 5 or 10 exist if you are comparing several trucks. Current amounts sit on the pricing page, and a finished report is on view in the sample.

  1. Decode the VIN taken from the truck itself and match model, engine and plant to the ad.
  2. Look up open recalls using the full number, then under each model name.
  3. Read the preview and buy the report only if the truck still appeals.
  4. Have a mechanic who knows these trucks look it over before you pay.

These trucks are old enough that title and damage history matters as much as the build sheet, and the report costs little beside one unexpected repair.

Documents on a desk beside four numbered Hummer VIN decoding steps

Where this information comes from

Sources and photos: Facts checked against the sources above in November 2026. Photos by Ahmet Yüksek ✪, Carrie Allen www.carrieallen.com and Zoshua Colah on Unsplash; diagrams by VINDecode.

Keep reading

Frequently asked questions

How do I decode a Hummer VIN?

Enter all 17 characters in the decoder at the top of this page. You get model, engine, body and plant from the maker's filing. Compare each field with the advert and the paperwork, then run recalls and a history report before any money changes hands.

What does a Hummer VIN start with?

An H1 starts with 137 because AM General built it. An H2 starts with 5GR, an H3 with 5GT and an H3T pickup with 5GN, all General Motors identifiers. A different start on a truck sold as a Hummer needs an explanation from the seller.

Why did my recall search find nothing on an H3T?

NHTSA's recall search depends on the model name entered. For 2009 and 2010, H3T returned no records, while H3 returned two campaigns, one naming the H3T. Search by full VIN, try both names, and confirm any open recall with a dealer.

Does a decode show accidents or title brands?

No. It describes the truck as built. Salvage or flood brands, crash damage, odometer history, theft and liens come from other records, which a vehicle history report gathers. The preview is free and the report is a one-time payment.

Why does my H1 show no drive type?

Decoders print only what the manufacturer filed, and the H1 decodes I ran left drive type blank while H2 and H3 decodes filled it in. Treat a blank as a field to confirm by inspecting the truck, not as proof the number is bad.

Now check the car itself

The guide explains what to look for. The report shows what this VIN has on record.

Find the VIN on the driver's door jamb, at the base of the windshield, or on the registration and insurance card.