VINdecode

Rolls-Royce VIN Decoder: Read the Build, Then Check the Car's History

Paste the 17 characters into the decoder above and it reads them against the data Rolls-Royce Motor Cars filed with NHTSA: model, body, engine and the plant. That is the car as it was built. What it has been through since, from a flood to a rolled-back odometer, is a separate question that a history report answers.

Updated November 5, 2026 · Sources cited below

Have a VIN? Check that car

Find the VIN on the driver's door jamb, at the base of the windshield, or on the registration and insurance card.

View sample report
Hand holding luxury car keys beside a panel listing three Rolls-Royce VIN checks

THE SHORT ANSWER

Enter the full 17-character VIN in the decoder above. A Rolls-Royce number should start with SCA, or SLA on the multipurpose models. Compare the model, body, engine and year it returns with the advert and the title. The decode covers the factory build only. Title brands, damage, mileage and theft records need a history report, and the preview is free.

Prefixes on file
SCA (passenger car) and SLA (multipurpose vehicle)
Plant on all three decodes I ran
Goodwood, England
Models in NHTSA's list
Phantom, Ghost, Wraith, Dawn, Cullinan, Spectre
Decode limit
Shows the build, not the car's later life

What a Rolls-Royce decode shows, from three real VINs

Owners who file NHTSA complaints often type their VIN in. I took three of those, trimmed each to 11 characters and ran them through NHTSA's decoder. The answers show the sort of detail you should expect from a number on a Rolls-Royce you are thinking of buying.

CarStartsEngineBodyDriveSeries
2009 Phantom CoupeSCA6.75 L, 12 cylindersCoupe, 2 doorsRear-wheelRR3
2011 GhostSCA6.6 L, 12 cylindersSedan, 4 doorsRear-wheelRR4
2014 Phantom Drophead CoupeSCA6.75 L, 12 cylindersCoupe class, 2 doorsBlankRR2

Every one named Goodwood, England, as the plant. The open Phantom came back with the body class Coupe, so only the trim field says it is a drophead. A blank in the drive column is normal, since the decoder prints only what the maker submitted.

SCA and SLA: the two identifiers that belong to the maker

When I searched NHTSA's manufacturer table for the word rolls, two entries came back for Rolls-Royce Motor Cars. SCA is filed as a passenger car. SLA is filed as a multipurpose passenger vehicle and has been public since May 2019. A third hit, 1R9356, is a trailer company with a similar name and has no connection to the cars.

In practice the first three characters give you a quick sanity test. A listing that claims to be a Phantom but opens with something else deserves a hard look at the title and the car itself, because a VIN that does not fit the maker is one of the oldest signs of a swapped or doctored number.

  • SCA: the passenger-car identifier, seen on the Phantom and Ghost decodes above.
  • SLA: the multipurpose-vehicle identifier, decoded by NHTSA to Rolls-Royce.
  • Anything else: confirm against the title and the stamped number before going further.

Which model names exist for which years

NHTSA lists models year by year, and the pattern is useful when a seller's model year looks off. The table below sums up what I read.

Model yearsNames in the list
2001 and 2002Silver Seraph, Corniche and Park Ward
2004 to 2009Phantom only
2010 to 2013Phantom, Ghost
2014 and 2015Phantom, Ghost, Wraith
2016 to 2018Phantom, Ghost, Wraith, Dawn
2019 to 2021Phantom, Ghost, Wraith, Dawn, Cullinan
2022 and 2023Phantom, Ghost, Cullinan
2024 onwardPhantom, Ghost, Cullinan, Spectre

Nothing is listed for 2003. If a seller calls a car a 2012 Dawn, or a Cullinan from 2017, the dates cannot both be right.

Leather car seats above four Rolls-Royce VIN decode facts

Warnings and blank fields in the result

The decoder attaches a numbered message to each answer. Code 0 means the ninth character, the check digit, calculated correctly. Code 6 means the VIN was incomplete, which is what my trimmed numbers returned. Codes 11 and 12 concern the tenth character, the model year position.

  • Code 1: the check digit does not work out. Re-read the number from the car, because a single misread letter usually causes it.
  • Code 11: position ten holds a character that cannot stand for a year. The barred six are zero and the letters I, O, Q, U, Z.
  • Code 12: the year you typed disagrees with the year the tenth character encodes.
  • Code 14: the maker's filing does not cover some characters, so expect blanks.

On my three decodes the tenth characters were B, 9 and E, matching 2011, 2009 and 2014. Where the year code and the advert disagree, ask for the title before anything else.

Recalls follow the model year and the build

Put the same number into NHTSA's recall lookup. What I read there shows the kind of finding to expect, and a few campaigns were filed by BMW of North America, not by Rolls-Royce under its own name.

CarCampaignFault
Phantom 2003 to 201010V447000Brake vacuum pump valve could leak oil into the brake booster
Ghost 201112V166000Water pump electronics can overheat, raising fire risk
Ghost 2021 to 202323V645000Glass over the instrument panel
Cullinan 2020 to 202626V143000Rear seat bolts may be loose, affecting belts and backrest
Spectre 202424V039000Ground cable at the front electric motor

The Cullinan notice tells owners to leave the rear seats and luggage area unused until the repair is done. An open campaign need not end the deal. It does mean asking the seller whether the repair happened and getting the paperwork that proves it.

An owner's wait for a recall part

From an NHTSA owner complaint

In 2018 the owner of a 2011 Ghost reported that the recall letter about the electric water pump had arrived, but the dealer had no part to do the repair. The owner thought the delay unreasonable, though nothing had gone wrong yet. The notice itself says parts were limited at first and that owners should park outdoors until the repair.

Take from this that a recall found on a VIN can be open for years on an old car. Before you pay, find out whether the fix was done, and make the owner show proof if it was.

What the decode leaves out about a used Rolls-Royce

A decode repeats what the factory recorded. It cannot see how the car has been treated, and with a car that costs this much to fix, the gaps matter more than the specifications.

QuestionDecodeHistory report
Was it ever branded salvage, junk or flood?NoTitle brands from state and insurer data
Has it been in a crash?NoAccident and damage records, with auction photos where they exist
Is the mileage believable?NoOdometer readings over time
Is it listed as stolen, or does a lien remain?NoTheft, lien and impound records
Which options and trim did it leave with?PartlyFactory specifications

The federal NMVTIS program draws on state titling agencies, salvage yards and insurers, and its consumer page warns about saltwater flooding, which can damage electrical systems and airbag sensors, and about stolen vehicles re-badged with copied VINs.

Run the history check once the decode matches

  1. Copy the number off the plate fixed to the Rolls-Royce, then check it against the paperwork and the ad.
  2. Decode it above and compare model, body, engine and year with what you were told.
  3. Search recalls on the same number and ask the seller for repair proof on anything open.
  4. Start the history check from the decoder. The decoder preview carries no fee. The full report is bought once and is never a monthly plan.

The current price for one report, or a bundle, is listed on the pricing page. Read the report ahead of any deposit, and if it shows a brand, a mileage gap or a lien, bring it to the seller or step away.

Documents on a desk beside four numbered Rolls-Royce VIN steps

Where this information comes from

Sources and photos: Facts checked against the sources above in November 2026. Photos by Shadow Photography, Owen Michael Grech and Brandon Russell on Unsplash; diagrams by VINDecode.

Keep reading

Frequently asked questions

How do I decode a Rolls-Royce VIN?

Type all 17 characters into the decoder at the top of this page. It returns model, body, engine and plant from the maker's filing. Compare each field with the advert and the title, then search recalls on the same number and read a history report before you pay.

What does a Rolls-Royce VIN start with?

The manufacturer table gives Rolls-Royce Motor Cars two identifiers: SCA for passenger cars and SLA for multipurpose vehicles. The three Phantom and Ghost numbers I decoded all began SCA. A listing with a different start is worth questioning against the title.

Where was my Rolls-Royce built?

The plant appears in the decode result. All three numbers I ran, a 2009 Phantom, a 2011 Ghost and a 2014 Phantom Drophead Coupe, returned Goodwood, England. Plant details are reported by the maker, so a blank field means the filing left it out.

Can a VIN decoder show accidents or flood damage?

No. A decoder reports how the car was built. Accidents, title brands such as salvage or flood, odometer history and theft records come from state, insurer and salvage sources, which is the data a history report assembles. The preview shows whether any of it exists.

Why did my decode return an incomplete VIN warning?

Code 6 means fewer than 17 characters were entered, or the check could not finish. Re-read the number from the dash plate or door jamb. A misread character is the usual cause, and the letters I, O and Q cannot appear in a VIN at all.

Now check the car itself

The guide explains what to look for. The report shows what this VIN has on record.

Find the VIN on the driver's door jamb, at the base of the windshield, or on the registration and insurance card.